Skip to main content
Loading…

Better photos

The SealedChain photo mat

A free sheet to print. Lay a card on it and the app takes photos that come out the same every time, measured in millimetres.

What it does

  • ✓ Measures the card. The small codes above and below the card say how big they are, so the app works out the card's real size. A card that measures smaller than standard gets a warning: a trimmed card is a common fake.
  • ✓ Reads the light. The codes' black and white squares tell the app the colour of your lighting. It's recorded next to the photo, and you can view a colour-corrected version (the photo itself is never changed).
  • ✓ Makes auto-crop reliable. The dark background makes the card's edges easy to find, even white-bordered cards.

Print it

  1. Download the mat: dark background (recommended) or light version (uses less ink).
  2. Print on US Letter at 100% / "Actual size", not "Fit to page".
  3. Check the size: the ruler should read 50 mm, the corner codes 25 mm wide and the small codes 12 mm. If they don't, the measurements will be off.
  4. Laminate it with matte film (glossy reflects light), or print on matte card stock.

Use it

  1. Lay the card inside the dashed outline. Don't cover the codes.
  2. Open the camera in the app (Seal a Card or Photo Record). Hold the phone flat over the card until it says "◎ Phone level ✓".
  3. Use soft light from the side (a window, or a lamp off to one side), not a bulb straight overhead.
  4. With Auto on, the photo takes itself once the card is found, steady and level. The preview shows "Size" when the mat was read.