Help
Everything in one place: getting started, your collection, selling, trading, and what happens if something goes wrong.
1 · Getting started
Scan a card. Tap Scan, photograph the front and then the back. The app lines the card up, checks the shot and saves a photo record with a serial. Once your sealing kit arrives (kits are on pre-order), you'll scan the label's QR code first and the record becomes a sealed record.
Seal a card. Once you have a sealing kit, open a card from My Cards and tap Seal this card. The app walks you through four steps: (1) scan the QR code on your tamper-evident label, (2) place the card in the top loader or one-touch holder, (3) record a short sealing video showing the card going into its case, and (4) apply the label. Once sealed, the record is permanent and anyone who checks the serial or scans the label sees the full proof chain.
Check a card. Anyone can type a serial, or scan the label, on Check a Card. The page answers one question first: is this card OK to trust? Then it shows the registered photos, the proof strip (live photo · timestamped · sealed) and the card's history. Use Compare a photo to hold the card up to its registered photo, or to check whether a photo in someone's listing is really registered.
Share a card. On your card's page, Share my card makes a square image with both photos, the serial and a QR code that opens the check page. Send it anywhere a buyer might see it.
Remove a card. A photo record you no longer want can be removed from its card page (More → Remove this photo record). You get a confirmation and 30 days to restore it. Sealed cards are permanent — that is what makes them worth trusting.
Symbols you'll see: sealed · photo record (not sealed) · ✓ verified in person · flagged · reported stolen · for sale · open to trade.
2 · Your collection
My Cards. Every card you scan lands in My Cards with its photos, details and history. Adding a stack at once? Photograph a Stack takes the photos for you, one card after another.
Who can see it. Your cards are public by default so buyers can check them. To keep one out of your public collection and Discover, open its card page and tick Hide from my collection.
Set Tracker. From My Cards, open Set Tracker to see which cards you have and which you still need for each set.
Insurance export. Insurance Export builds a PDF of your collection with photos, serials and details, ready to send to an insurer.
Want List. Add cards you're hunting for on your Want List and you'll be notified when a matching card is added or listed.
3 · Selling from your shop
Every collector can run their own shop. Your inventory is the collection you already have.
- Open a card from My Cards and tap List this card.
- Pick For sale (set a price) or Accept offers, and add a short condition statement so buyers know what to expect.
- The card appears on your storefront and in Discover. Find your storefront link on your Profile or Seller Dashboard and share it anywhere.
Storefront. Your storefront is public as soon as you have one active listing. With 10 or more, it also shows up in search engines.
Payment. During the pilot, SealedChain doesn't process payments. You and the buyer arrange payment directly; SealedChain records the listing, the hand-off and who shipped and received. Use the card's check page as the proof in your listing, and agree on payment before you ship.
Selling somewhere else? The Seller Tools menu has Seal Before You Ship (document condition right before you mail it) and the Facebook BST kit, which writes a post with your check link built in.
4 · Buying a card
- Check it first. Every listing opens the card's check page: live condition photos, the Bitcoin timestamp, its history and any stolen or flagged warnings. Compare the photos with what the seller is describing.
- Make an offer or message the seller. Signed in, tap Make an offer (cards, cash or both) or Message owner on the check page.
- Agree on payment. During the pilot, SealedChain doesn't take payments. Use a payment method that offers buyer protection, or cash in person. Avoid personal or “friends” payments or other unprotected payments with someone you don't know.
- Confirm when it arrives. When an offer is accepted it becomes a trade with Mark my card as shipped and Confirm I received it intact buttons, so both sides have a record. If it doesn't match, tap Report a problem.
5 · How trading works
Card-for-card swaps on Trades; cash can be added to even up a trade (settled between you, not held by SealedChain). See Trust & disputes for what happens if something goes wrong.
Before you start
Both cards need to be scanned first — each person scans their own. On your card's page, mark it open to trade so it shows up as available. Before proposing or accepting anything, open the other person's card on Check a Card and look at what's actually registered — photos, serial, condition notes. That's the whole basis of the trade.
Starting a swap
- From an open-to-trade card's check page (or straight from Trades), tap Propose a swap and pick one of your own open-to-trade cards to offer in return. You can add a short message.
- The other collector sees it under Trades and can Accept, Decline, or leave it pending. Each trade has its own message thread for working out details.
- Either side can Cancel while it's still pending — nothing's locked in until it's accepted.
Trading in person
The app uses the same shipped/received buttons whether you meet up or mail. Face to face: once the swap is Accepted, tap Mark my card as shipped as you hand yours over, and have the other person tap Confirm I received it intact (or Report a problem) once they've actually looked it over. Even standing right there, take the minute to compare it against what was registered before confirming.
Trading by mail
- Work out shipping addresses in the trade's message thread.
- Ship your card, then tap Mark my card as shipped once it's with the carrier.
- When the other card arrives, check it against its check page (seal, serial, photos) before doing anything else.
- Matches what was described? Tap Confirm I received it intact. Doesn't match, or the seal's broken? Tap Report a problem — that leaves a timestamped, disputed record both sides can see (see Trust & disputes). It doesn't trigger a refund on its own: there's no escrow in this pilot, so there's nothing to refund.
What's not live yet
Shipping labels are in testing (test labels, not real postage). No refunds or arbitration — but a disputed trade is no longer stuck for good: the two of you can agree on how to resolve it, or an admin can step in if you can't. See below for how that works.
6 · SC Grade
SC Grade is a condition score from 1 to 10 that collectors build together, instead of one grader's opinion on one day.
- A new card starts with an AI estimate from its condition photos.
- Collectors can tap Grade this card on a card's page and score centering, corners, surface and edges from 1 to 10.
- As more collectors grade a card, the AI estimate counts for less and the community's grades count for more. Reviewers whose grades hold up over time carry more weight.
SC Grade documents condition. It isn't a guarantee of authenticity or value.
7 · Trust, proof & disputes
Bitcoin timestamps. New records are gathered into batches. Each batch gets one fingerprint that covers every card in it, and that fingerprint is timestamped on Bitcoin through OpenTimestamps, usually within a few hours of the card being added. That proves the record existed at that time and hasn't been changed since, without trusting SealedChain. See every batch and its Bitcoin block on the Proof Log, or open a batch to download its proof file and check it yourself.
What actually happens today if a trade doesn't go the way you expected, and what's planned for later. See also the Pilot Participation Terms.
What's live right now
Every scanned card gets a permanent record: fingerprinted, timestamped photos and a serial anyone can look up on Check a Card. That record is your main protection. Before you agree to anything, check it yourself.
SealedChain never holds money: a swap is card for card, and any cash added to even it up is settled between the two of you, so there's nothing for SealedChain to hold or release. If a card doesn't arrive as agreed, Report a problem marks the swap disputed with your note, timestamped and visible to both sides. From there, either of you can propose an outcome — cancel the trade, or mark it resolved so it goes ahead — and the other side has to agree before anything actually changes. If you can't agree, a SealedChain admin can step in and force an outcome instead of leaving it stuck. SealedChain still isn't investigating who's right — there's no escrow in this pilot, so there's nothing to refund, and the admin fallback exists to unstick a disagreement, not to adjudicate the facts of it. That's deliberate while this is still an early test, and the Pilot Participation Terms say so explicitly.
Practically: compare the other person's registered photos and serial against what they're describing before you accept a swap, and again once it's in hand before you confirm receipt. That comparison — not a support ticket — is what actually protects you right now.
Why it stays narrow, on purpose
SealedChain isn't trying to be the arbiter of who's lying — that's a heavy, unscalable role, and claiming it invites more liability than a young company should carry. The design leans on objective, pre-defined checks (seal intact? serial matches?) to settle the overwhelming majority of cases automatically, and reserves a narrow human-review lane for the minority those checks can't settle. Today, with no escrow live, that shows up as a simple rule: SealedChain records what you tell it, honestly and permanently, and leaves the judgment call to you and your counterparty.
8 · Frequently asked questions
Do I need an account to verify a card?
No. Anyone can scan a QR code or visit a card's URL to check its record — no account required. Creating an account is only needed to register your own cards or initiate a trade.
What happens if the seal is broken when a card arrives?
Tap Report a problem on the card's verify page. This creates a timestamped, disputed record visible to both parties, and shows you a way to propose resolving it (cancel the trade, or let it complete) that the other side has to agree to. SealedChain doesn't hold funds in this pilot, so it won't automatically trigger a refund — if you can't agree, a SealedChain admin can step in to force an outcome.
How do I know the photos weren't swapped after registration?
Photos are taken live in the app and stamped by our server when they're taken. Then each record joins a batch whose fingerprint is timestamped on Bitcoin. If the photos or any detail were changed afterwards, the fingerprint wouldn't match. You can check this yourself on the Proof Log.
9 · Privacy
SealedChain is in pilot. Here's what we collect and why:
- Account email — for sign-in only; never sold or shared with third parties.
- Card photos — stored securely and associated with your account. Your cards are public by default so buyers can check them; you can hide any card from your public collection.
- Trade activity — your card registry and completed trades are visible on the public proof log (without your email).
- Card scans — if you use the card-identification feature while signed in, the scan photo may be stored to help improve the card catalog.
A full privacy policy will be published before SealedChain exits pilot. Questions? Email support@sealedchain.io.
10 · Contact
Questions about a trade, a record or a label? Email support@sealedchain.io. The public Proof Log shows every registry batch and its timestamp proof.